Sliding Garden Shade Awning Components

Components used to create your very own retractable shade awning, be the envy of all your neighbours with a modern retractable system. Availble in three different types of canvas to suit.

All parts are sold seperatly allowing you to pick and choose to suit your own requirements.
This sliding pergola canopy provide much needed shade over your patio or dining area, of course when the sun is not too bright they can be fully opened.

The garden sliding shade is NOT designed to be waterproof and is for shade only.

Here we list only the mechanical components aswell as the fabric canvas, if you would also like the timber frame please visit our larch structure page

Features of the sliding garden shade canvas:

Knitted 220 gr HDPE synthetic material

Almost all UV radiation is reflected

Cooling and shade

Options Available:

P020854 - 318x500cm Sandy beige

P020853 - 300x500cm Ivory

P020852 - 318x500cm Silver grey

3 x 3mm Stainless steel cables - Two 100mm from each end. One in the center

Length of pleat when fully folded. Measured from the wire - Approx 270mm.

Distance between eyes (lengthways) approx 500mm.

We do not offer different sizes or make to order.

Please note, the design of the steel cables has changed to a screwing version of the retractable pergola canopy.

Optional fastenings available:

P020851 - Stainless steel fastening set for sliding canvas (4 wires at 5.5m) with tensioner, eye bolts and swivel coupling

P020850 - Rail trim for sliding canvas, aluminium (to prevent sagging) - 11 Rods, 3m in length, The outside diameter of these rods is +-1.3cm

P020849 - Stainless steel closing system for sliding canvas 1 double pulley, 1 single pulley, 1 clamp and 1 cord in either White/Black dependent on stock and availability

Notes on the options:

The fastening set provides the metal wire to suspend the awning through eyelets, it also comes with tensioners for the wires. You could also design your own fastening set from materials locally.

The closing set is pulleys and rope to allow opening and closing of the slide shelter with a single pull, you could also design your own closing and opening system.

The rods provide tension width ways to the awning and stop it sagging between the steel wire fastening set, the same thing could be accomplished with other materials.

Timber supporting structure:

Available on a separate page is a Larch DIY wooden structure, This is listed separately because it is has a longer lead time and is sent via a much larger haulier.

Approximate Delivery Time: 7 - 14 Working Days